EZ Lifter - Add-On for Dual Jack | ZJC-2-ADS-K

EZ Lifter - Add-On for Dual Jack | ZJC-2-ADS-K

$ 1,733.11

Call for Availability

Zimmerman EZ Lifter - Add-On for Dual Jack

Lift your heavy-duty trailer at the push of a button. If you need to build a trailer or replace existing jacks, these hydraulic jacks are perfect for most applications with livestock, horse, vehicle, cargo, dump, or even flatbed gooseneck trailers. *This is the best option for trailers with an existing Hydraulic Pump.

For more details about our jacks systems please look over our manuals.

Download: EZ Lifter Jack Manual

Please contact us if you have any questions we can assist you with.

Give us a call at 1 (903) 455-7777

Part Number: ZJC-2-ADS-K

  • Two 12,000 lb Zimmerman Retrofit Cylinders
  • A plumbing kit

Kit includes:

  • Zimmerman Retrofit Cylinders
  • Rubber Strap
  • Hydraulic Hose (to go between HPU and Jack)
  • Hydraulic Fittings
  • Battery Cables
  • Maximum Hydraulic Flow Rate is 2 GPM
  • Flow Divider
  • Selector Valve

Please contact us if you have any questions we can assist you with.

Phone: 1 (903) 455-7777

3-Year Standard Warranty:

Premium Supply warrants your product to be free from defects in material and workmanship for a period of 36 months from the original date of purchase. If you discover a defect in a product covered by our warranty, we will repair at our option using new or refurbished components, or if repair is not possible, we may replace the item.

Warranty Extension:

Premium Supply warrants for 5 years from the date of purchase any of its kits that have the three products listed below in the circuit and have a hydraulic fluid pre-filtration process in place. The hydraulic fluid must be pre-filtered while being put into the hydraulic pump reservoir, with an FPH cleanliness code of at least (ISO 4406) 15/12. All single acting circuits must be plumbed with a hydraulic hose going to both sides of the cylinder. (Contact Premium Supply for instructions on how to implement these quality control measures).

  • KTI power unit (single or double-acting, “with a ground wire connected directly from the battery post to the electric motor of the pump”)
  • Bridon Load Control Valve (on the load holding port)
  • SP-2 SolarPulse Solar Panel (mounted per our recommendation)


This warranty covers defects in manufacturing discovered while using the product as recommended by the manufacturer. The warranty does not cover loss or theft, nor does coverage extend to damage caused by misuse, improper installation, abuse, unauthorized modification, improper storage conditions, or natural disasters. This warranty does not cover parts that are subject to normal wear and tear. Paint, finishes, or paint preparation is done by the customer are not covered under this warranty, nor is the deterioration of the paint and appearance caused by normal wear and tear. This warranty becomes void upon modifications not authorized by Premium Supply.

Limits of Liability:

Should the product fail, your sole recourse is repair or replacement, as described in the preceding paragraphs. Premium Supply will not be liable to you or any other party for damages resulting from the failure of the product. Damages not covered by this warranty include, but are not limited to, lost profits, lost savings, damage to other equipment, incidental or consequential damages arising from the use or inability to use this product. In no event will Premium Supply be liable for more than the amount of your purchase price, not to exceed the current list price of the product and excluding tax, shipping, and handling charges. By using this product, the User accepts all terms stated herein.

Premium Supply reserves the right to make improvements to any model or product without notice. This warranty supersedes all previous warranties written or implied.

Please contact us if you have any questions we can assist you with.

Call Us Toll-Free U.S. 1 (903) 455-7777